Testseek.se har samlat 47 tester av Crucial / Micron PC3-12800 1600MHz Ballistix Series och det genomsnittliga betyget är 81%. Scrolla ned och se alla testerna för Crucial / Micron PC3-12800 1600MHz Ballistix Series.
Januari 2008
(81%)
47 Tester
Genomsnittligt betyg av experter som har testat produkten.
Sammanfattning: Crucial BallistiX DDR3 PC3-16000 er brikker som kan by på god ytelse og meget gode overkokkingsevner på Intel brikkesett. Derimot så fungerte det ikke fullt så bra med Nvidia brikkesett. Når vi tar en titt på prisen som ligger på rundt 1400 kroner så e...
God ytelse, Gode overklokkingsegenskaper, Klar for Intels X48brikkesett, DDR3 er fremdeles et dyrt alternativ, Tilgjengelighet, Forrige side, Innledning, Spesifikasjoner, Testoppsett / Overklokking, Ytelse, Konklusjon
DDR3 er fremdeles et dyrt alternativ, Tilgjengelighet
Nær sagt som vanlig når produsentene av minne lanserer produkter med litt brask og barm, så er det overklokkere eller generelle entusiaster som skal fristes. Crucials Ballistix PC3-12800-moduler er intet unntak. Modulene kan nemlig friste med både "sn...
Publicerad: 2013-05-12, Författare: Thomas , testad av: tomshardware.com
Sammanfattning: We've abided by Intel's 1.55 V recommendation for two architectures and two die shrinks, yet most performance memory manufacturers ignore it. Recent problems with one of our builds raised the question, how far can we push RAM without killing CPUs? Remem...
This is a very nice ram kit with a lot of potential, you can overclock it quite a bit and it runs smooth and stable at a high performance. The size makes it possible to mount big cpu coolers and have a lot more space around the cpu socket for mods and...
This particular Crucial Ballistix kit works extremely well on AMD-based platforms and they are quite versatile in regards to the speeds and timings that they can run. We found that with little effort we were able to get these sticks clocking well with...
Great Overclocker, Looks stylish, Performs well, Temp sensors
Does no come packaged with the Crucial M.O.D. software
The Crucial Ballistix 1600 Mhz ram preformed better than most would have thought. It offers a lot of potential to overclockers and enthusiasts. The Ballistix excelled in our tests. The higher the Mhz, the better it proved to be. Even though I was limit...
XMP profile for 8-8-8-24 timings at 1600MHz, Good bit of headroom for overclocking, Finned heatsinks and thermal sensors provided to enhance performance, Moderately priced compared to kits with similar specifications, Limited lifetime warranty
Current release of monitoring utility is still in Beta and may be flaky, Other than the thermal sensor, there's nothing really new
The Crucial 4GB PC3-12800 DDR3 kit with thermal sensor offered rock solid performance during our testing. In most of our testing, the stock speed results were comparable with other 1600MHz kits on hand, and we were able to get about a 250MHz overclock...
In any field someone always has to be the fore-runner. The bow that breaks the waves to allow everyone else to follow in the wake. More often than not that very fore-runner is quickly overtaken by everyone else as they refine and improve the process.Sadly...
bmr_approved.png, Good price for the value ($119 USD), Crucial Limited Lifetime Warranty, Interesting design and colors will appeal a bunch of users, Integrated IC for thermalmonitoring via MOD utility (support 32 and 64 bit OS), Will work on any Intel based system and probably on AMD systems too,
Overclocking is very limited due to the ICs in their memory chips
Crucial Ballistix BL2KIT25664FN1608 performance is just average. The kit isn't able to work at 1T command rate and it needs more than 1.5v to work stable with very loose timings and common frequencies. They also suffered from a cold boot bug or someth...
Sammanfattning: Video Review: The Crucial Ballistix PC3-12800 DDR3 Dual Channel 4GB Memory performs very well. It has a speed of 1600MHz, latency of 8-8-8-24 and is 1.65 volts. The orange/silver heatspreader looks excellent and since this memory is of normal dimension it will not interfere with CPU coolers. I was a little disappointed though that it would not run at 8-8-8-24 using 1T, I had to set it to 2T. This is still very acceptable and still yields excellent results.
